Used Cleaning Equipment
Aqueous Conveyorised
| Stock Code | Description |
| DD323J | Tempest & Dibb tunnel wash plant, wash/ rinse /dry,
conveyorised wash m/c aperture 18" x 8"high, oil separator,
steam extraction, dryer fan, control panel. Wash pressure 3.5bar(max 4bar), electric heating, pumped fill & drain. Overall dims 15'x5'x8'high. |
| DD329J | Marr-Line 2 stage 500-250 conveyorised hot wash and rinse unit, brand new s/s conveyor 500mm wide x 250mm high, 36kw heating to ea tank, fully s/s cons, motorised uplifting doors, c/w oil skimmer, exhaust fan & |
| DD330J | Marr-Line 250 conveyorised wash/dry machine, conveyor 250mm wide x 150mm high, electric hot wash, centrifugal blow off fan, c/w oil skimmer and exhaust fan. Mft 1994. Overall 2500 x 1250 x 1000mm high. |
| DE382 | Dawson Model DC5000 S conveyorised spray washing machine, having a power pre wash, powerwash, prerinse and final rinse. Conveyor aperture 700 x 700 mm. 2 Speed conveyor, electrical heating. Total machine length 2800mm. Wash pump 1170 l/min. Rinse pump 700l/min. All stainless stell construction. |
| DE411 | Vixen Tristar Model 500 contiuous parts washer/drier with rotating drum using Archimedes Screw principal to drive the parts through the system. Heated wash, blown warm air drier. Stainless steel drum 500mm dia fitted with drive speed control. Electrically heated, adjustable spray bar pressure. The machine is in excellent condition and available ex stock. |
| DE411A | Vixen Tristar Vibratory Feeder - an automatic parts feeder to suit Tristar 500 washing/drying unit S/N. Available ex stock |
| DF436 | Niagara automatic washing machine for tubes. The tubes are
located in a horizontal rotating magazine and are sprayed with hot detergent
from two manifold nozzles which clean the bore and outside of the tube. The machine will accommodate tubes from 38-50mm dia and up to 3 metres long, continuously processing tubes at the rate of 30 per minute. Automatic loading is possible. The machine is complete with oil separation and a stainless steel basket filter to remove swarf and solids, electrically heated (63kw) and is constructed in stainless steel with thermal and acoustic insulation. Overall dimensions 4830long x 1000wide x 1650mm high. Manufactured 1997 s/n 503.102. |
| DF447 | Vixen Tristar Model 300 continuous parts washer and drier
with rotating drum using the Archimedes screw principal to drive the parts
through the system. Electrically heated 9kw wash, with oil skimmer, blown warm air drier. Stainless steel drum 300mm dia with drive speed cotrol. Adjustable spray bar pressure. Overall dimensions 1500 x 1000 x 1000mm high. |
| DG457 | Conveyorised tunnel washer with air knife blow off. Conveyor
250mm wide and 100mm high. Electric solution heating, conveyor speed control
with reverse. Soultion blow off by air knife fitted at end of conveyor. |
| DG475 | Marr Line Model 2ST continuous parts washer/drier. Conveyorised wash unit, conveyor is standard stainless steel honeycomb mesh 420mm wide, height clearance 75mm. It is either continuous or indexing with speed control. Heated spray wash and heated 'blow off', complete solution oil skimmer and Serfilco particulate filtration. |
| DG476 | Metalas IT-29 Tunnel washing & drying machine |
Aqueous Front Loading
| Stock Code | Description |
| DA95J-IS | Teijo Wash Unit Model 1600-23 Batch multiphase spray wash cabinet. Tech spec as follows: Max work load 750kg. Total electrical load 56kw. Cabinet aperture 800mm x 1400mm x 1400mm deep. Pump flow rate 350ltr/ min @ a pressure of 5 bar. 3 stages with many combinations e.g. wash/rinse/phosphate. Wash zone & sumps s/s cons. Steam exhaust fan. Loop conveyor to |
| DC185 | ‘Powerwash’ single stage spray wash batch cabinet
cleaner. Heavy duty single stage front load detergent wash system. Basket
750 x 750 x 750mm. Constructed in heavy gauge mild steel, electric heating,
incorporating the following features: |
| DC203 | Kermad front loading, rotary basket spray wash cabinet.
Carrier size 900 x 900 x 280mm high, upper & lower spray booms, rotating carrier, solution heating & filtration, process timer. |
| DC241J | Oakcliffe Rotajet Model D36 two door front loading industrial
spray wash machine. The components are washed by spraying heated detergents
at high pressure with a rotating spray boom. Pump motor rating 4kw, operating
pressure 75psi. Component carrier 38”dia x 18”h, mobile front
load table, fixed roller exit to rear. Door operation by pneumatic cylinder & incorporated in the air line is a pressure regulator & filter, cleaning solution has a bag filter 36”dia x 9”h, inc gravity fine filter. Heater rating 12kw. Overall 4’ x 3’10” x 6’h. Mfg |
| DC242J | Oakcliffe Rotajet Model D36 two door front loading industrial
spray wash machine. The components are washed by spraying heated detergents
at high pressure with a rotating spray boom. Pump motor rating 4kw, operating
pressure 75psi. Component carrier 38”dia x 18”h, mobile front
load table, fixed roller exit to rear. Door operation by pneumatic cylinder & incorporated in the air line is a pressure regulator & filter, cleaning solution has a bag filter 36”dia x 9”h, inc gravity fine filter. Heater rating 12kw. Overall 4’ x 3’10” x 6’h. Mfg |
| DD267J | Teijo Model 800 front loading spray wash machine. The unit has a drop down front door with a load/unload platform. The component basket size is 800mm dia and 500mm high. It has a rotating spray boom to base sides and top of basket. Electrical solution heating, mild steel construction, thermal insulation. Extraction fan, control panel and timers included. |
| DD307 | Oakcliffe Rotajet Model D48 Front loading wash/rinse/dry
cabinet. Carrier size 38 x 38 x 20”high, max load 800lbs. Wash &
rinse cycles achieved by upper & lower rotating spray booms, pump 7.5kw @ 80psi, component drying by blown warm air, wash/ rinse solutions gas heated; fitted with basket type solution filters and an oil skimmer, inc bifurcated exhaust fan. |
| DD312 | Tempest & Dibb Type 700 front load wash cabinet, heavy duty s/s cons, working area 600 x 600 x 400mm high. Electric solution heating with upper/ lower rotating spray booms. 11kw Lowara pump 80gpm @ 80psi, c/w large capacity bag filters, steam exhaust vent to top of unit, water fill connect with ball valve make-up. 400/440v |
| DF440 | Oakliffe Rotajet Model D24 front loading parts washer for
aqueous detergents. Components washed in heated detergents sprayed onto
the work carrier from a rotating spray boom. Component carrier 24"
x 24" x 10" deep. Electric heating, inline filter, oil skimmer, pneumatically operated door. Complete with steam exhaust fan. |
| DF452 | Oakcliff/Ardrox Rotajet Model No.D40 front loading single
stage spraywash machine. Basket 31" x 31", load height clearance
24". Electrically heated bifurcated exhaust fan, drum type oil skimmer,
door opens down to create load table. Control panel including pressure gauge 10 bar & temp 120c. Large front sludge door. |
| DG477 | Teijo Model C-1600-23 batch multiphase spray wash cabinet mft 1987. 3 stage with many combinations eg wash, rinse & phosphate. Max load 1000kgs, 56kw total load, washing height 800mm. Door width 1400mm, depth 1400mm. 460/340ltrpm pump flow @ pressure 5/2.5bar, 7.5/3kw rating. Wash zone & sumps fully stainless steel cons. Steam exhaust fan. Special feature load/unload doors at either end providing a 'straight' thrugh operation. Loop conveyor to return baskets to start. |
Aqueous Precision Cleaning
| Stock Code | Description |
| D157 | Kerry Aqueous Pre-Clean/ Ultrasonic Clean/Spray / Immersion Rinse tank. Tank Size 415 x 525 x 300mm deep. Comprising pre-wash tank, heated and filtered ultrasonic tank and spray/immersion rinse. |
| D194BR | Alfa Laval manual operated Spray Wash Cabinet c/w pump,
reservoir, spray lance, solution heating Perspex front cover with hand
apertures. Also inc. Extract/condense unit. Cabinet size 6’ x 3’ x 3’. |
| D54 | ICI Clealine II A6069/UR/50 2 stage clean & rinse plant.
Each comp 690 x 600 x 500mm deep. NEW ultrasonic in sonic tank, heating & thermostat. Little used plant v.g.c. Overall 4'10" x 3'10" x 5'2" high. |
| D58 | Dawe Model 6265-80/6 Aqueous small parts cleaning tank.
Internal dimensions of tank 10" x 8" x 6" deep. Complete with separate "Dawe Model 6221 25khz, Ultrasonic Generator. |
| D84A | Kerry Model KS 351 Ultrasonic Cleaning Tank, with solution
heater. Tank dimensions 11” x 9” x 9” deep. Complete with KS 375 generator. |
| DA15 | I.C.I Cleanline II Model A4030 UR 280 This is a Twin Tank Ultrasonic Clean Water Rinse Unit , for Aqueous Cleaning, each comp 400 x 300 x 280mm deep. The Ultrasonic Cleaning Tank is Electric heated with |
| DC262 | JENSEN 9364 Six Stage Fully Automatic Aqueous Ultrasonic
Washing System. The machine comprises the following:- Stage 1. Pre wash clean in heated detergent, with vertical and rotational carrier agitation. Mesh bag filtration ad oil skimmer. Stage 2 Ultrasonic clean in heated detergent. Vertical and rotational carrier agitation. Mesh bag and ultra filtration. Stage 3, 4 & 5 Water rinse tanks with ultrasonic agitation (tank 3), vertical and rotational carrier agitation. Cascading rise tanks with DE and reverse osmosis water treatment. Stage 6 Six cycle hot air drying tunnel with carrier rotation. The machine is complete either roller conveyor feed and roller conveyor exit, with return carrier conveyor. Carrier size 26" x 12" x 8" deep. Machine "Footprint" 35' x 25' including return conveyor. Original cost in excess |
| DD333 | Branson single tank ultrasonic cleaner int dims 250 x 200 x 250mm deep, electric heating c/w thermostat, s/s construction, c/w Branson 6223 generator. |
| DD335 | Hilsonic submersible transducer 12" x 22" x 4"deep arranged for base mounting c/w an FMG 1200 watt generator. |
| DE363 | Kerry UCR 351H ultrasonic cleaning bath with secondary rinse
tank. Each tank has dimensions of 250 x 200 x 250mm deep. Tank 1 is ultrasonic clean complete with solution heating. Tank 2 is town water rinse, overflow to drain. |
| DE379 | Kerry Special CRD 525/6 Auto. All tanks have dimensions
of 525 x 415 x 350. Stage 1 Ultrasonic clean. Stage 2 Rinse. Stage 3 Ultrasonic
rinse Stage 4 Air blow off. Stage 5 Hot Air Dry. Stage 6 Vacuum dry. Complete with automatic basket handler. Including conveyor and fixtures. (Ex IBM) |
| DE386 | Lucas Dawe 3 Tank aqueous ultrasonic cleaning system with
two rinse tanks. Each tank has dimensions of 630 x 380 x 530mm deep. Tank 1 is heated ultrasonic wash. Tank 2 is town water rinse, weir to drain. Tank 3 is heated final rinse. Complete with comport 31 automatic basket handling |
| DE388 | Kerry PE450/5A This is a 5 station fully automatic ultrasonic
wash/rinse/rinse/rinse hot air dry unit. All tanks have effective dimensions of 450 x 300 x 350mm deep. Tank 1 Ultrasonic clean with heating, pump and filtration. Power drain Tank 2 Cold town water rinse, complete with power drain Tank 3 and 4 Deionised water and reverse osmosis water rinsing, immersion or spray with heating, including solution filtration Tank 5 Blown warm air drying, twin chamber. Complete with a Kerry autotrans Minor LL mark 1, fully automatic basket handling system. Condition as new |
| DE396A | Kerry Special CRD 525/6A fully automatic clean/rinse /dry ultrasonic cleaning system. Each process tank has dimensions of 525 x 415 x 350mm deep. Stage 1 is heated prewash with pumped sprays. Stage 2 is heated ultrasonic clean, Stage 3 is first rinse, Stage 4 is D.I. Rinse, Stage 5 vacuum dry, Stage 6 blown warm air dry. Complete with autotrans fully automatic carrier handler |
| DE402 | Kerry submersible ultrasonic transducer Model KST1510 suitable for side wall mounting having effective working dimensions of 1000 x 250 x 100mm, complete with a Kerry KS1500 generator operating frequency 38khz. |
| DE402A | Kerry Model KST 1510 submercible transducer for side mounting, effective dimensions 1000x250x100mm complete with KS 1500 generator |
| DF420 | Branson model 220 stainless steel heated tank 220 x 120 x 100mm deep. 50kw heater, insulated c/w lid |
| DF421 | KLN bench top stainless steel ultrasonic cleaner, tank 250 x 150 x 150mm deep. Thermostat control. Complete with lid. |
| DF454A | Lucas Dawe submersible ultrasonic transducer for base mounting, size 200 x 600 x 100mm, complete with generator type 6403A-24. ex D168PB |
| DF454B | Lucas Dawe submersible ultrasonic transducer for base mounting, size 200 x 600 x 100mm, complete with generator type 6403A-24. ex D168PB |
Aqueous Top Loading
| Stock Code | Description |
| DA58 | Turbex’ 1100 Industrial Parts Washer, 360c Spray coverage. Spinning Basket via water pressure. Basket 1050mm dia x 480mm max clearance. 300kg max load. Electric heating 9kw up to 70c. |
| DA90 | Turbex’ 1100 Industrial Parts Washer, 360c Spray coverage. Spinning Basket via water pressure. Basket 1050mm dia x 480mm max clearance. 300kg max load. Electric heating 9kw up to 70c. |
| DC174 | Turbex 1100 parts spray wash unit. Rotating carrier by water pressure, 360deg spray boom, electrical solution heating, effective carrier size 1000mm dia. 480mm high, max load 300kgs. |
| DC177 | Turbex 1100 parts spray wash unit. Rotating carrier by water pressure, 360deg spray boom, electrical solution heating, effective carrier size 1000mm dia. 480mm high, max load 300kgs. |
| DC187 | Turbex 700 Top Loading Parts Washer. Rotating work carrier 620mm dia x 370mm high. Max work load 150kg. Electric solution heating, upper and lower spray bars. Carrier speed control. |
| DC239J-I | Oakcliffe Rotajet D24 Special washing machine. Serial number
324/12-95 manf. 1995. Mild steel construction, electric fluid heating
6kw, basket dia. 600mm (no basket) No doors at present, can be supplied with single or twin lift up doors. Pump 4KW 75psi. Load cap. 200kgs |
| DD281 | Turbex 1100 parts spray wash unit. Rotating carrier by water pressure, 360deg spray boom, electrical solution heating, effective carrier size 1000mm dia. 480mm high, max load 300kgs. |
| DD287J | Passaponti Lexell RJ Model 950 top loading spray washer,
s/s cons with fluid tank insulation, inc s/s component basket 950mm dia.
500mm load height, electric fluid heating (5kw). |
| DD319J | Turbex 800 Top loading parts washer with rinsing. Fully stainless steel construction. Rotating work carrier 620 mm diameter, height 300 mm. Maximum work load 150 kg. Electric heating, process timer, and oil skimmer. |
| DD320J | Turbex 800 Top loading parts washer with rinsing. Fully stainless steel construction. Rotating work carrier 620 mm diameter, height 300 mm. Maximum work load 150 kg. Electric heating, process timer, and oil skimmer. |
| DD340 | Horgren top loading 3 stage spray wash machine. Comprising a rotating work carrier having effective dimensions of 550mm dia x 170mm deep. Upper, lower and side spray bars. After washing the parts are rinsed and then dried by blown warm air. Steam. Wash & Rinse phase each with its own sump, pump and filter. Electric heating and basket filter, complete with cabinet |
| DE407 | Turbex 800 Top loading parts washer with rinsing. Fully stainless steel construction. Rotating work carrier 620 mm diameter, height 300 mm. Maximum work load 150 kg. Electric heating, process timer, and oil skimmer. |
Automatic Work Carriers
| Stock Code | Description |
| DB144 | AJM Comport 31 Automatic handling system, suitable for use
with Multistage Solvent & Aqueous Cleaning Systems. 30kg lift capacity
with telescopic mast. Including Beam & Catinery. |
| DC179 | Comport 31 automatic basket handling system, suitable for fitment to ‘inline’ batch cleaning systems. 30kg lift capacity, fully programmable for tank top mounting. |
| DD277A | Kerry Autotrans Mini Single Axis Basket Handler. Suitable for fitment to any Kerry USC unit. This is a four position lit unit, immersion, vapour, freeboard, |
| DD284 | Kerry Autotrans Mk 2 Fully automatic basket handling system. Microprocessor controlled user programmable system, motorised carriage rail mounted over the centreline of the tanks, c/w all framework, catenary and |
| DD341 | Comport 36 Automatic basket handling system, suitable for use with multitank solvent and aqueous wash systems 30kg lift |
| DF437 | AJM Comport handler |
| DX10 | AJM Comport 31 Automatic handling system, suitable for use
with Multistage Solvent & Aqueous Cleaning Systems. 30kg lift capacity
with telescopic mast. Normally monorail mounted above centre line of tanks. |
|
DX6 |
AJM Comport Model 84 Automatic handling system suitable for use with inline multistage cleaning systems.80kg lift capacity and is a floor mounted cantilever design usually fitted to rear of tanks. Designed for low headroom. Factory programmed. |
| DX8 | Kerry Autotrans Model Minor HL. Automatic handling system for use with multi tank cleaning systems. Monorail mounted over tank centre line. 30kg lift capacity, customer programmable. (Four progs. 4 on/off |
| DX9 | AJM Comport 31 Automatic handling system, suitable for use
with Multistage Solvent & Aqueous Cleaning Systems. 30kg lift capacity
with telescopic mast. Normally monorail mounted above centre line of tanks. |
Dunk Wash Aqueous
| Stock Code | Description |
| D225 | Applied Pnuematic lift unit. To work with Dunk Wash Machines. Low level load height 400mm, lift height 1100mm. Rollers on load/unload table. 250kg lift. |
| DC176 | A refurbished Applied Chemicals Model ND3 Dunk Wash. 21kw
Working size 40” x 23” x 16”deep, max work load 450kgs,
electric heating suitable for water/detergent washing |
| DD309 | “Applied Chemicals” Model NDJ Aqueous Dunk Wash Machine. Dipping Space 21” x 18” x 17”. Electrically heated, 4kw. 34kg loading, 43 gallon sump. |
| DD326J | Applied Chemicals Model AL-4ES Dunk Wash. Mild steel construction c/w thermal insulation, electric heating, pneumatic agitation, 250kg load. Carrier size 1320 x 710 x 560mm deep. |
| DE395 | Dawson & Barfos Dunk Wash machine. Effective dipping
space 400 x 400 x 250mm deep. Pneumatic agitate cold wash (electric heating
available at extra cost). The unit can also be equipped with a pump and filter unit |
| DE403 | Dawson Model 'Mini Dunker' Dunk Wash machine. Effective dipping space 400 x 400 x 250mm high pneumatic agitate cylinder, clean out door, cold wash (electric heating available at extra cost). |
| DE413 | “Applied Chemicals” Model NDJ Aqueous Dunk Wash Machine. Dipping Space 21” x 18” x 17”. Electrically heated, 4kw. 34kg loading, 43 gallon sump. |
| DE414 | “Applied Chemicals” Model NDJ Aqueous Dunk Wash Machine. Dipping Space 21” x 18” x 17”. Electrically heated, 4kw. 34kg loading, 43 gallon sump. |
| DE417 | “Applied Chemicals” Model NDJ Aqueous Dunk Wash Machine. Dipping Space 21” x 18” x 17”. Electrically heated, 4kw. 34kg loading, 43 gallon sump. |
| DF429 | Turbex Model DW500 aqueous dunk washer. Electric heating, mild steel construction, Pneumatic lift and agitation system Load grating, Timer & thermostat, emergency stop, Air filter and regulator Platform size 1200 x 800mm Max load height 600mm Max load 500kg |
| DF430 | Marr Dunk Wash unit. Carrier dimensions 600 x 400 x 400mm deep. Heavy duty construction, electric heating, pneumatic lift and agitate system. |
| DG465 | Nu-Dip junior dunk wash |
S Series Solvent
| Stock Code | Description |
| DA85 | Reed/ICI Models SS44V Solvent Cleaning Tank gas fired. 4' x 4' x 4' motorised roller lid. 100% freeboard. |
| DC207 | Read Engineering SS42V Single Comp. Solvent Degreasing Plant,
working dims 4' x 2' x 2'deep. New Gas or ELECTRIC heating, double row
water cooling, four sided rim extraction, stainless steel construction, thermal insulation. Inc. New Heating |
| DC212 | ICI S Series Degreasing Plant, Model S42 LV. This unit is suitable for use with Triklone ‘N’, and is electrically heated. This plant is water cooled, and has four sided rim ventilation. (Fan not supplied). Effective working area 4’ x 2’ x 2’ deep. Motorised roller lid. |
| DE383 | ICI 'S' Series 42V single compartment 4' x 2' x 2'deep vapour
degreaser, electric heating, water cooled, 4 sided extraction, thermal
insulation, motorised lid, c/w 350cfm extraction fan, stainless steel construction |
| DE392 | Model RB.SS.422V. Single compartment 4'x 2'x 2'deep solvent vapour degreaser. Steam heated but can be converted to gas/electric heating. Complete with 4 sided extraction and double row cooling. Insulated. No panel or fan. |
| DE393 | RB Model SS422V solvent degreasing plant. Compartment size 4' x 2' x 2' deep. Steam heated but can be converted to gas or electric. Full stainless steel construction, 4 sided extraction, double row cooling and thermal insulation. No panel or fan. |
| DF431 | RB Model SS422V solvent degreasing plant. Compartment size 4' x 2' x 2' deep. Steam heated but can be converted to gas or electric. Full stainless steel construction, 4 sided extraction, double row cooling and thermal insulation. No panel or fan. |
| DF446 | ICI 'S' series degreaser |
| DG472 | ICI 'S' Series Model S42LV solvent degreasing plant. Electrically heated two bath liquor/vapour each comp 2' x 2' x 2'deep. Water cooled with four sided extraction (fan not included). Thermal insulation, motorised lid, full stainless steel construction. |
| DG478 | ICI 'S' series Model 42.5LV electric degreaser |
Solvent Cleanfast
| Stock Code | Description |
| DC180 | ICI Cleanfast 265 Degreaser Electric heating |
| DD289A | Special ‘CJ Systems’ Cleanfast Model 3022 V. This is a single compartment Vapour Degreaser suitable for use the Trichloroethylene. Internal tank dims 30’ x 2’ x 2’x deep, Steam heated, but can be fitted with new Gas or Electric heating. Fully s/s construction, Thermal Insulation, four sided Rim Extraction with fan, water cooled, motorised lid & control panel. M/F 1998 |
| DD289B | Special ‘CJ Systems’ Cleanfast Model 1522 V. This is a single compartment Vapour Degreaser suitable for use the Trichloroethylene. Internal tank dims 15’ x 2’ x 2’x deep, Steam heated, but can be fitted with new Gas or Electric heating. Fully s/s construction, Thermal Insulation, four sided Rim Extraction with fan, water cooled, motorised lid & control panel. M/F 1998 |
| DD289C | Special ‘CJ Systems’ Cleanfast Model 1022 V. This is a single compartment Vapour Degreaser suitable for use the Trichloroethylene. Internal tank dims 10’ x 2’ x 2’x deep, Steam heated, but can be fitted with new Gas or Electric heating. Fully s/s construction, Thermal Insulation, four sided Rim Extraction with fan, water cooled, motorised lid & control panel. M/F 1998 |
| DE355 | ICI/CJ Systems single compartment vapour degreaser 4'6" x 2' x 4'deep. Motorised roller shutter lid, 4 sided rim extraction, s/s construction. New gas or electric heating. |
| DE405 | ICI Cleanfast DLS265 single compartment solvent vapour degreaser int dims 1000 x 500 x 750mm deep. Electric heating, 4 sided extraction with fan, vented clean out door, powertrim and thermal insulation, c/w unique ICI double lid system and integrated basket lift. NOTE: The DLS with the double lift system meets the requirements of the EPA guidance note PP6/23. |
| DF434 | ICI Cleanfast DLS265 single compartment solvent vapour degreaser
int dims 1000 x 500 x 500mm deep. Electric heating, 4 sided extraction
with fan, vented clean out door, powertrim and thermal insulation, c/w
unique ICI double lid system and integrated basket lift. NOTE: The DLS with the double lift system meets the requirements of the EPA guidance note PP6/23. |
| DF441 | ICI Cleanfast Model 165V single compartment vapour degreaser,
comp.working size 700 x 650 x 610mm deep. Gas heated (natural or propane), 4 sided rim extraction with fan, thermal insulation, manual roller lid. |
| DF448 | ICI Cleanfast Model 165V solvent vapour degreaser compartment size 700 x 650 x 610mm deep. Electric heating, water cooling, manual roller lid. Stainless steel construction, thermal insulation, four sided extraction with fan. |
| DF450 | ICI Cleanfast Model 265LV 2 bath liquor/vapour unit suitable
for use with Triklone. 2 compartments each 650 x 650 x 600mm deep. Steam
or electric heating, water cooled. Four sided extraction with fan, stainless
steel construction, manual roller lid, thermal insulation. |
| DG469 | ICI Cleanfast E165V single compartment solvent vapour degreaser, electrically heated. Compartment size 700 x 650 x 610mm deep. Water cooled, four sided extraction with fan, thermal insulation, stainless steel construction. |
| DG471 | ICI Cleanfast Model E265V single bath solvent vapour degreaser, compartment size 1300 x 650 x 610mm deep, electric heating, water cooled. Four sided rim extraction with fan, thermal insulation, manual roller lid. Full stainless steel construction. |
DG474 |
ICI Cleanfast DLS265 single compartment solvent vapour degreaser.
Internal dims 1000 x 500 x 500mm deep, electric heating, 4 sided extraction
with fan, vented clean out door, powertrim and thermal insulation, c/w
unique ICI double lid system and intergrated basket lift. NOTE: The DLS with the double lift system meets the requirements of the EPA guidance note PP6/23 |
Solvent G Series
| Stock Code | Description |
| DD351 | ICI Vapour Phase |
| DE356 | ICI GS22V This is a single compartment vapour degreaser
effective compartment size 2' x 2' x 2' deep. Extraction, fan and panel not included. Stainless steel tank assembly, galvanised top. Gas fired Barter burner. |
| DE357 | ICI GS42LV This is a 2 compartment liquor/vapour degreaser,
each compartment has dimensions of 2' x 2' x 2' deep. Steam or electric
heating, water cooled, 2 sided min extraction fan and panel not included.
Stainless steel tank assembly, galvanised top |
| DE371 | ICI GS 62V A single compartment vapour degreaser effective
working area 6' x 2' x 2' deep. Steam heated, water cooled 2 sided min
extraction, fan not included. No panel. Stainless steel tank assembly,
galvanised top. New gas or electric heating available. |
| DE372 | ICI GS 62.5V This is an electrically heated solvent Vapour
Degreaser, having effective working dimension of 6'0" x 2'6"
x 2" deep. The tank assembly is constructed in stainless steel, and the top section is galvanised MS. The machine is water cooled and has two sided extraction, and is fitted with sliding lids. |
| DE373 | ICI GS 42V A single compartment vapour degreaser, effective
working area 4' x 2' x 2' deep. Electric heating, water cooled two sided
extraction no fan or panel. Stainless steel tank assembly, galvanised top. |
| DE376 | ICI GS 22V single compartment solvent vapour degreaser,effective
working area 2' x 2' x 2' deep. Electric heating, water cooled, 2 sided rim vent. |
| DE419 | ICI G42LV galvanised liquid/vapour electric degreaser. Each comp 2' x 2' x 1'6" c/w control panel, low level switch, water separator. Jurno top/bottom cut outs. Available used only, run and checked |
| DF455 | ICI Model GS42V (modified and upgraded safety equipment
per Aerospace organisation), single compartment 4' x 2'x 2' solvent
vapour degreaser. |
Special Precision Solvent Cleaning
| Stock Code | Description |
| D119 | “Techno Chemie” Model Mini Lift 3 Solvent Degreasing Unit. The system has ultrasonic cleaning, rinsing, and drying in a single chamber. The carrier size is 450 x 300 x 200mm, with a max carrier weight of 40kg. It is a fully enclosed unit, water cooled, with basket rotation. |
| D129 | Dawe/Branson Model 6501AR ultrasonic solvent degreaser.
Stage 1 heated ultrasonic clean. Stage 2 vapour rinse & dry. Suitable
for use with Trichloroethylene, fitted with refrigerated cooling, stainless
steel cons, electric heating. Tank dims 160 x 250 x 120mm deep. Optional extra: Three sided fume extraction unit, tank top mounted, constructed I galvanised mild steel. Fan not |
| D180 | ICI Cleanline I Model 1410/3L/10 Each comp 14 x 10 x 10” arranged as liquid/liquid/vapour, electric heating, water cooled |
| D47 | Kerry Compact USC 200/2, 2 compartment ultrasonic solvent degreaser, each comp 10" x 6" x 6" deep. Stage 1 heated ultrasonic clean, Stage 2 vapour rise & dry, electric heating, water cooled. 240V supply. |
| D89 | “Rapidry" 3 Stage Solvent Drying / Cleaning Plant. Each Compartment 6.5" x 6.5" x x6.5". Construction S/S. Water cooled. Serial No. RD 2350. Suitable for use with HCFC 141B |
| DA67 | Kerry (Thermo Technic) Model TTK 450/2HP 2 compartment liquid/vapour
solvent degreaser.Each compartment 450 x 300 x 350mm deep. Stage one is
liquid hot immersion clean, and Stage two is Vapour Rinse/Dry. Electrical
heating, refrigerated cooling. Suitable for Methaklone. Solvents with a max boiling point of 50c. |
| DA73 | Kerry’ USC 750/3. 3 compartment each 475 x 300 x 300mm deep comprising stage one heated & filtered ultrasonic clean, stage two clean rinse, stage three vapour dry. Water cooled, four sided rim ventilation c/w movair fan. New sonics. |
| DB106 | Kerry USC 175/2HP Solvent 2 stage cleaning system - ultrasonic clean/vapour dry, each tank 178 275 x210mm deep Refrigerator cooled 220/240v 1ph. Suitable for use with solvents having a boiling point of 50 C or less. |
| DB118 | Kerry Kleensolve Model 300 / 2HP. This is a two comp’ solvent machine, suitable for solvents with a boiling point that does not exceed 50C. It is arranged as a liquor/ vapour unit, and each comp.’ Has dims.of 250 x 350 x 250mm deep. Complete with refrigerated cooling. |
| DB120 | I.C.I Cleanline 1 Solvent Vapour Degreasing Plant. Effective compartment size 1000 x 330 x 425mm.Complete with refrigerated cooling. This is a heat pump plant and is suitable for solvents that do not exceed 50C boiling point. See option below for up-rated refrigeration suitable for trichloroethylene. |
| DB137 | Kerry USC 300/2R. This is a two compartment ultrasonic solvent
system. Each compartment has dimensions of 250 x 350 x 250 mm deep. Stage
one is ultrasonic clean in heated solvent, stage two is vapour rinse/dry. Electric heating, refrigerated cooling. Suitable for use with Trichloroethylene. |
| DB98 | Kerry/TTK 175/2HP 2 stage liquid/vapour solvent cleaning
plant. Each comp. 275 x 178 x 210mm deep. Heat pump with refrigerated cooling. Suitable for use with solvents boiling point up to 50C. |
| DC188 | Kerry Multi-Matic Model 1P50 ultra low emission, totally
enclosed, self contained automatic solvent degreaser suitable for use
with Triklone & Perklone. Effective carrier size 320 x 470 x 200mm.
Front loading and once carrier is loaded Clean/Rinse/Dry cycle is automatic.
Cleaning is achieved by immersion/spraying of heated solvent, rinsing by pure solvent vapour, drying by warm air. Refrigerated cooling, carbon recovery of solvent vapours, vacuum exhaust of load/unload zone. Manufactured in 1995 and is ‘AS NEW’. Fully refurbished - available for immediate delivery. |
| DC200 | Branson two stage ultrasonic degreasing plant. Stage one ultrasonic clean, stage two vapour rinse & dry, each comp. 300 x 250 x 250mm deep, refrigerated cooling, electric heating, rim extraction with twin fans. |
| DD268 | Branson Special 3 Stage Ultrasonic Solvent Degreaser. Each of the 3 process tanks have dimensions of 32” x 24” x 20” deep. Stage 1. is heated Pre-Wash. Stage 2. Is heated Ultrasonic Clean, with solution Filtration. Stag 3. Is Vapour/Rinse/Dry. The unit has Refrigerated Cooling,. Fume Extraction available as an optional extra. |
| DD302 | ICI Cleanline 2 W4030/UV/28. 2 comp ea 400 x 300 x280mm deep. Tank 1 heated ultrasonic clean, tank 2 vapour rinse/dry, water cooled, electric heating, rim ventilation (no fan). |
| DD304 | ICI Cleanline 2 Model R3525/UV/25 2 compartment unit each comp 350 x 250 x 250mm deep, Stage 1 heated ultrasonic clean, Stage 2 vapour rinse & dry, c/w electric heating, rim ventilation (No fan), refrigerated cooling, pump & filter not included |
| DD305 | ICI Cleanline 2 Model W3525/UV/25, 2 compartment unit each comp 350 x 250 x 250mm deep, Stage 1 heated ultrasonic clean with pump & filtration, Stage 2 vapour rinse & dry, c/w rim ventilation (no fan), electric heating & water cooled. |
| DD347 | Kerry USC 375/2R ultrasonic solvent degreaser including
refrigerated cooling. This is a 2 compartment unit, each tank 14"x10"x10"deep.Stage
1 heated ultrasonic clean, stage 2 vapour rinse & dry, complete with
Filtration and Refrigeration cooling. Suitable for use with CHLORINATED SOLVENTS |
| DD352 | ICI Cleanline 2 Model R3525/UV/25 Solvent degreaser. This is a two compartment unit, liquor, ultrasonic each compartment has dimensions of 350 x 250 x 250mm deep. Electric heating, refrigerator cooled, no fan. |
| DE368 | Kerry USC 175/2HPF solvent 2 stage cleaning system - ultrasonic
clean/vapour dry, each tank 178 x 275 x 210mm deep, refrigerator cooled,
220/240v 1ph. Suitable for use with solvents having a boiling point of 50c or less, complete with pump and filter to tank 1. |
| DE410 | Kerry USC 300/2HPF including Kerry autotrans Minor HL.
A two compartment ultrasonic solvent degreaser suitable for use with
solvents having a max boiling point of 50c. Each compartment 250 x 350
x 250mm deep. Stage 1 heated & filtered ultrasonic clean, Stage
2 vapour rinse & dry. Heating by thermo-recycled heat pump, refrigeration
cooled, pump and filter. Complete with Kerry autotrans fully automatic
basket handling system. |
|
DF449 |
ICI Cleanline 2 Model W4030/ULV/280 three compartment ultrasonic
clean, liquid rinse, vapour dry. Each comp. 400 x 300 x 280mm deep, stainless steel construction, electric heating with thermostatic controls. The ultrasonic stage is complete with solution pump and filter. The unit complete with rim ventilation and a fan is included. Water cooled. Option: Supply and fit direct coupled refrigerated cooling |
| DF453 | ICI Cleanline Model 1812/LV/10. 2 compartment liquor/vapour
solvent degreaser.Each compartment 18" x 12" x 12" deep. Tank 1 heated solvent wash, Tank 2 vapour rinse/dry. Electric heating, water cooled, rim extraction (no fan). |
| DG461 | ICI Cleanline 2 Model R4030/LL/28 two compartment solvent degreaser - liquor/liquor or liquor/vapour, each comp 400 x 300 x 280mm deep. Electric heating, refrigerated cooling. |
| DG466 | Kerry AVD 300 Ultrasonic Solvent Degreaser designed for use with HFE solvents. This is a two compartment unit and each tank has dimensions of 300 x 250 x 250 mm deep. Tank one is heated and filtered ultrasonic clean, and Tank two is immersion or vapour rinse/dry. The machine is complete with triple row cooling, 200% freeboard, solvent filtration, power fill/drain. Full stainless |
| DG467 | Kerry Model USC300/2HPF ultrasonic solvent degreaser for
use with solvents having a boiling point of 50c or less. Two compartments
each 250 x 350 x 250mm deep. Tank 1 heated ultrasonic clean with solution filtration. Tank 2 vapour rinse/dry.Heated using a thermo-recycling heat pump, c/w refrigerated cooling. |
| DG473 | ICI Degreaser |
| DG479JS | Kerry Microsolve Model M350 Co-Solvent Unltrasonic Cleaning
System. Manufactured in 2002. The Co-solvent system provides 2 cleaning stages, both with ultrasonics and filtration, followed by vapour rinsing and freeboard drying. In the first cleaning tank gross contamination is removed and in the second stage, final cleaning takes place in distilled solvent. This is followed by a rinse in the vapour zone, and finally a freeboard dwell for final drying. The machine is complete with the Autotrans Robotic basket handler. The units are designed to work with HFE solvents but can also be used with the other hallogenated solvents such as Methylene Chloride. The special features of this Kerry system are triple coil reflux cooling, vapour break, 150% freeboard, solvent monitoring and solvent top up. The machine is complete with a sliding lid. The M350 system has 2 compartments and each compartment has dimensions of 350 x 250 x 350mm deep. Both stages are complete with ultrasonics and filtration, and include solution heating. The tanks are constructed in SS and the frame and panels are painted MS. The machines are in an "as new" condition, and are offered with a parts and labour warranty. |
| DG480JS | Kerry Microsolve Model M350 Co-Solvent Unltrasonic Cleaning
System. Manufactured in 2002. The Co-solvent system provides 2 cleaning stages, both with ultrasonics and filtration, followed by vapour rinsing and freeboard drying. In the first cleaning tank gross contamination is removed, and in the second stage final cleaning takes place in distilled solvent. This is followed by a rinse in the vapour zone, and finally a freeboard dwell for final drying. The machine is complete with the Autotrans Robotic basket handler. The units are designed to work with HFE solvents but can also be used with the other hallogenated solvents such as Methylene Chloride. The special features of this Kerry system are triple coil reflux cooling, vapour break, 150% freeboard, solvent monitoring and solvent top up. The machine is complete with a sliding lid. The M350 system has 2 compartments and each compartment has dimensions of 350 x 250 x 350mm deep. Both stages are complete with ultrasonics and filtration, and include solution heating. The tanks are constructed in SS and the frame and panels are painted MS. The machines are in an "as new" condition, and are offered with a parts and labour warranty. |
| DG481JS | Kerry Microsolve Model M350 Co-Solvent Unltrasonic Cleaning
System. Manufactured in 2002. The Co-solvent system provides 2 cleaning stages, both with ultrasonics and filtration, followed by vapour rinsing and freeboard drying. In the first cleaning tank gross contamination is removed, and in the second stage final cleaning takes place in distilled solvent. This is followed by a rinse in the vapour zone, and finally a freeboard dwell for final drying. The machine is complete with the Autotrans Robotic basket handler. The units are designed to work with HFE solvents but can also be used with the other hallogenated solvents such as Methylene Chloride. The special features of this Kerry system are triple coil reflux cooling, vapour break, 150% freeboard, solvent monitoring and solvent top up. The machine is complete with a sliding lid. The M350 system has 2 compartments and each compartment has dimensions of 350 x 250 x 350mm deep. Both stages are complete with ultrasonics and filtration, and include solution heating. The tanks are constructed in SS and the frame and panels are painted MS. The machines are in an "as new" condition, and are offered with a parts and labour warranty. |
| DG483 | ICI Cleanline 2 Model W4030/UV/28 ultrasonic solvent degreaser,
suitable for use with Triklone, Methaklone and nBp's. 2 compartments each
400 x 300 x 280mm deep. Tank 1 heated and filtered ultrasonic clean, Tank
2 vapour rinse and dry. Water cooled, electric heating, complete with
rim extraction (fan extra) and lift off lid. Tank assembly constructed in stainless steel, outer panels painted MS. |
| DG484 | ICI Cleanline 2 Model R2818/UV/28 ultrasonic solvent degreaser,
suitable for use with Trichloroethylene, Methaklone, bBp's etc. 2 compartments
each 280 x 180 x 280mm deep. Tank 1 ultrasonic wash in heated and filtered
solvent. Tank 2 vapour rinse and dry. Refrigereated cooling, electric heating, fume extraction (no fan), lift off lid, constructed in 316 stainless steel, (panels painted MS). Optional extra: Fume extraction including fan |
| DX12 | Forward Ultrasonics/KLN 2 stage ultrasonic solvent cleaner
each compartment 270 x 150 x 180mm deep. Stage 1 heated ultrasonic clean,
Stage 2 vapour rinse & dry. Stainless steel cons, refrigerated cooling,
electric heating. Optional extra: Three sided fume extraction unit, tank top mounted, constructed I galvanised mild steel. Fan not |
Home Page
| Special Services |
Surface Treatments | Cleaning
and Degreasing
Rectifiers and DC Power Supplies
| Ovens, Furnaces and
Chillers | Deburring
and Polishing
Blasting and Extraction |
Latest News | Riley
Direct | Stocklists |
Contact Us
Download Stocklists | EAMTM
| SEA
